Making quick tweaks and adjustments to your watercraft's carburetor can be extremely difficult, if not impossible especially if the watercraft is not firmly secured on land. Some watercraft carburetors are located underneath the exhaust system and are mounted with the high speed screws facing downward thus requiring you to pull out your flash light, mirror, and patience meter just to get to it. This can definitely be an aggravating task!
Our carburetor adjuster screws utilize a crossbar that extend beyond the carburetor body housing thus allowing simple, tool free adjustments to both low and high speed circuits. You can quickly make adjustments with your fingers without the need for tools. They are also specially designed to clear and not interfere with the accelerator pump linkage and arm lever.
JetWorks carries the following carburetor adjuster screws organized by application:
| Mikuni "I" series 44/46, OEM Yamaha GP800 & Sea-Doo 951 |
Part No. |
| High Speed cross bar screw |
SA-100 |
| OEM Yamaha Carburetor, XL1200LTD, XLT1200, GP1200R |
Part No. |
| Low Speed cross bar screw |
SA-200 |
| High Speed cross bar screw |
SA-300 |
| OEM Kawasaki Carburetor, Kawasaki 800SX-R |
Part No. |
| Low Speed cross bar screw |
SA-500 |
| High Speed cross bar screw |
SA-100 |
| OEM Yamaha Carburetor, Superjet 2004+ |
Part No. |
| Low Speed cross bar screw |
SA-700 |
| High Speed cross bar screw |
SA-800 |
